    
|
 |
 |
| TW-1688A |
圓盤自動噴砂機 |
| Round plate automatic blast machine |
 特點: 採自動式噴砂以時間控制,台車以電空方式控制進出,省時間免費人力,又安全。本機台依客戶所需乾式,濕式訂制。
適合: 輪胎模.針織圓盤.鋁合金鋼圈,航太.國防.除碳化物...等表面處理。
Characteristics: Automatic blasting controlled by time, platform vehicle is controlled electrically in and out, saving time, no operator needed, safe. This machine is produced according to customer's dry or wet type.
Suitable for: Tire mold, needle weaving disk, alloy aluminum steel ring, aerospace, military defense, carbide remove and other surface process. |
 |
| TW-1688B |
輸送式自動噴砂機 |
| Conveying automatic blast machine |
 特點: 採輸送式自動噴砂,噴槍可自動搖擺大小,輸送帶速度可調整快慢,可依客戶要求單輸送或隻向左右來回輸送。
適用: 散熱片.主機外殼.主機外殼.凸玻璃.平玻璃...等。
Characteristics: Conveying type automatic blasting, blasting gun swing large or small automatically, conveying speed can be adjusted slowly or fast, single conveying or left-right periodical conveying according to customers' requirement.
Application: Heat fin, mainframe shell, concave and convex glass and etc. |
 |
| TW-1688C |
去除毛邊專用噴砂機 |
| Burr removing specific blast machine |
特點:
1.非一般輸送帶之裝置採精密
制具鍊條輸送式裝置,故連續
作業時非常平穩快速。
2.噴槍可依客戶需要採固定或
搖擺方式進行作業,可使溢膠
迅速消除。
3.操控容,易在面皮上即可調整
所需之風量符合效率與機體美觀。
4.採變頻控制可微調行進速度。
5.本機型尺寸可依客戶要求另行訂製。
適用: 去除電子產品支架雜物以封裝後之溢膠清除。
|
|
Characteristics:
1.Adopt precise jig chain conveying device, different from normal conveying device, stable and
fast in continuous operation.
2.Gun can be fixed or swung according to customers' requirement and glue overflow can be
removed fast.
3.Easy control, wind flow can be controlled on surface skin to correspond to efficiency and
appearance.
4.Variable frequency controlling can fine adjust the moving speed.
5.This machine dimension can be ordered according to customers' requirement.
Application: Remove electrical products rack miscellaneous articles and glue overflow.
|
│ 公司簡介 │ 各式噴砂機介紹 │ 業務聯絡 │ 回首頁 │
噴砂機專業研發製造團隊【大威噴砂機械有限公司】工業界噴砂機品質公認優良
噴砂機找大威 TEL: 02-2293-9960 FAX: 02-2295-1584 E-mail:tawei.t888@msa.hinet.net
|
